Universal Hands Free Car Kit Installation Instruction

Patented design works on all models of cellular phone including Samsung, Qualcomm/ Kyocera, Sanyo, Sony, NEC, Audiovox, Alcatel, Philips, Nokia, Ericsson, Motorola etc...

  User's Instruction

 

  Set up the MAGNETIC PHONE HOLDER

  1. Clean off dashboard very well with cleaner and make sure there is no dirt or oil.  Remove the adhesive tape from the square base, and press it to the clean surface. Position the magnetic holder properly (the best distance is less than 1.0 meter from the user).
  1. Remove the adhesive tape from oval metal, then stick at the back of the battery pack or leather case.
  1. To connect phone to holder, place oval metal piece into the oval opening of the magnetic holder.
  1. The holder is direction adjustable for up and down.
  1. To remove the phone press the release button on the side.  And then pull phone up.
  1. Let the holder sit alone on the dashboard for 2 to 3 hours so it will adhere properly.

  Start using the UNIVERSAL HANDS FREE

  1. Adjust the volume of the mobile phone to maximum level.
  1. Attach the microphone Velcro tightly onto the speaker of your mobile phone.  And position the mobile phone with the magnetic holder properly (the best distance is less than 1.0 meter from user).
  1. Insert the DC cord into the cigarette lighter of the car (make sure the power is on).
  1. Adjust the FM channel to the frequency indicated on the product.  For your convenience, store the frequency into the memory is suggested.
  1. Adjust the volume and tone on the radio to the comfort level you need after dialing.
  1. Your voice is transmitting through the microphone on your mobile phone (the microphone you regularly talk into) so speak toward mobile phone.  Your voice will be heard more clearly when you are directly facing the microphone of your mobile phone.
  1. The caller’s voice will be heard through the car stereo.

  For Best Results:

    1.  To avoid causing echo, adjust the volume on the radio to the comfort level.

    2.  Let the holder sit along on the dashboard fro 2 to 3 hours so it will adhere properly.

  Specifications:

Output Power              : 0.01mV
Output Frequency        : FM 87.9 MHz-108.8MHz
Consumption Current   : < 100 mA
Cigarette Lighter          : DC 12V-25V

 

BACK